HP Kayak XU, Руководство пользователя

Страница: 81 / 149

English 69
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Software Problem
If Your Application Software Does Not Work
If the PC Workstation reports the system is OK and the indicator light
over the power switch is illuminated, but some software won’t run,
refer to the operating system and/or application software manuals.
If You Have a Network Problem
If you have a problem with your PC Workstation’s network, run the
HPIEDIAG utility provided on the HP CD-ROM that contains the LAN
drivers, supplied with your PC Workstation. This utility should be run
from a minimal DOS system, without any LAN drivers loaded—achieve
this by booting from a system floppy disk. (If your PC Workstation is
running Windows NT 4.0, you will need to create this system floppy
disk on another PC.)
1 Insert the system floppy disk in the floppy disk drive and reboot your
PC Workstation.
2 Insert the CD-ROM containing the HPIEDIAG utility in the CD-ROM
drive.
3 Make the CD-ROM drive the current drive by typing, for example,
D:
if D is the letter of your CD-ROM drive.
4 Change to the DIAG directory by typing:
CD\LAN\DIAG
.
5 Start the HPIEDIAG utility by typing:
HPIEDIAG
. Follow
the instructions on the screen.
Then check the configuration of the integrated Ethernet interface
using the
Setup program. Refer also to the online Network
Administrator’s Guide supplied with your PC Workstation.
If Your PC Workstation Has an Audio Problem
If you encounter problems with the audio on your PC Workstation,
refer to the online guide
Using Sound on Your PC .
napa.bk : napa-ug3.fb4 Page 69 Monday, August 4, 1997 7:20 PM