HP Kayak XU, Руководство пользователя

Страница: 75 / 149

English 63
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
If Your Printer Does Not Work
•
Make sure the printer’s power switch is ON.
•
Verify that the power cord is plugged into the power outlet and the
printer.
•
Verify that you have the correct cable for the printer. Make sure that
it is securely connected to the correct connector (port) on the
PC Workstation and printer.
•
Check that the printer is online.
•
Examine the paper feed mechanism for a paper jam.
•
Make sure that the printer is configured correctly for the
PC Workstation and for the application.
a Ensure the PC Workstation’s port has been correctly configured
using
Setup
.
b Make sure the printer is correctly set up in your operating
system’s configuration.
c Ensure the application program’s “print” menu has been correctly
set up. (Refer to the manual supplied with the application
software.)
•
Check that the PC Workstation’s port is working properly by running
another peripheral connected to the port.
•
If you receive an error message, refer to the printer’s manual for help.
If Your Disks Do Not Work
If the Flexible Disk Drive
Does Not Work
•
Ensure you are using a formatted diskette and it is inserted
correctly.
•
Check you are using a diskette that is the right density.
•
Check that your flexible disk drive is correctly configured in the
Advanced menu of the
Setup program.
•
In the
Setup
program, select the Advanced menu, the Flexible Disk
Drives submenu, and check that the Floppy disk controller is
Enabled
.
•
Clean the flexible disk drive using a diskette cleaning kit.
•
Check that the flexible disk drive has been enabled in
Setup
.
•
Flexible disk drive (select the Security menu and the Hardware
protection submenu and check that Flexible Disks is
Unlocked
)
•
Boot on flexible disk drive (select the Boot menu and the Boot
Device Priority submenu and ensure that the device is in the
napa.bk : napa-ug3.fb4 Page 63 Monday, August 4, 1997 7:20 PM