HP Kayak XU 03xx, Руководство пользователя

Страница: 34 / 44

34
Complete the Questionnaire to Check Your Understanding
Complete the Questionnaire
to Check Your Understanding
Circle each letter that corresponds to a correct answer. (There may be more
than one correct answer to each question).
1
Can a 256 MB registered ECC memory module be mixed with a
non-buffered ECC SDRAM memory?
a
Yes, it can. However, the 256 MB module must be installed in
Slot 1.
b
No, it cannot. Registered and non-buffered memory modules are
not compatible.
2
Can a maximum of 512 MB of non-buffered ECC SDRAM memory
modules be installed on HP Kayak XA-s, XU Series 0301 and 0303,
and XW Series U3 and W3 PC Workstations?
a
Yes, by installing 4 x 128 MB memory modules.
b
No. On the HP Kayak XA-s, there are only three DIMM sockets
available.
3 For models with the HP FastRAID2 I/O Subsystem, can you boot
from the Windows NT CD-ROM when replacing a disk drive?
a
Yes, because Windows NT is capable of finding a new hard disk
drive.
b
No, because the new hard drive will not be found.
4
Where can you find all of the HP FastRAID software (ArrayConfig,
drivers and CI/O Manager) and Operating System Installation
notes (such as Windows NT 4.0)?
a
HP Kayak XU/XW PC Workstation Drivers CD-ROM.
b
HP’s WWW site.
c
Netscape Communicator CD-ROM.
5
To run the MaxiLife diagnostics program, does the computer
need to be powered on?
a
No, it doesn’t. The HP MaxiLife is always running and continuously
monitors the state of the LCD buttons.
b
Yes, it does. This can be easily checked, because the LCD status
panel will be blank.