HP Jornada 680, Руководство пользователя

Страница: 106 / 202

100 | HP Jornada 680/680e User’s Guide
Choose Typical or Advanced setup —Typical setup will
automate most of the connection configuration by using
default settings. Advanced setup allows you more control
over setup options. Typical and Advanced setup options
are offered at the beginning of each stage of the setup
process: Service Provider (in this case, your network
administrator), E-mail Service, and Web Service.
Input Service Provider information —This includes
information provided by your network administrator, such
as the dial-up telephone number and IP, DNS, and WINS
address settings. Many networks automatically (or, dy-
namically) assign both IP and DNS addresses. If your
network does not assign these automatically, you should
clear the Server-assigned addresses option and type the
addresses.
When you enter the IP address, you can also choose to use
SLIP (Serial Line Internet Protocol) if your network uses
this protocol. PPP (Point-to-Point Protocol) is the default
protocol for this option, but SLIP is supported as well. If
you have a SLIP account, select the Use SLIP check box
during the IP setup portion of the HP Jornada dialup
configuration process.
You also have the option to choose software and IP header compression options. Ask your
network administrator if these options are recommended for your account.
E-mail service
If you choose to configure an e-mail service, HP dialup will
prompt you to enter the following information:
UserID and password — The user name (UserID) and
password you use to access your e-mail account may be the
same as the user name and password you use to log on to
your network. However, sometimes another name and
password are used for this service.