HP J1473A Скачать руководство пользователя страница 46

Страница: 46 / 50

Rackmount Console Switch Owner’s Manual

www.hp.com/enclosures

Symptom

Action

OSD menu does not “pop-up”

Verify that you are pressing the Ctrl (control) key
twice within one second. If the problem persists,
contact Technical Support.

Unable to change ports

Verify that the port is powered. Check the address

using OSD

configured in OSD. If the server is powered and the
address is correct, call Technical Support.

Administrator password is

Call Technical Support.

forgotten

User password is forgotten

Contact your system administrator.

General Keyboard/Video

If the building has 3-phase AC power, ensure that

Problems

the server, the switch and the monitor are on the
same phase. Best results are obtained when
they are on the same circuit.

Use only Hewlett-Packard supplied cable. HP
warranties do not apply to damage resulting from
user supplied cable.

Do not use a 2-wire extension cord.

Test AC outlets at server, switch and monitor for
proper polarity and grounding.

Use only with grounded outlets at the server, switch
and monitor. When using a backup power supply
(UPS), power the server, switch and the monitor off
the supply.

Содержание J1473A



















































Результаты поиска

Содержание J1473A

Отзывы:

Похожие инструкции для J1473A

Бренды по названию

Популярные бренды

HP J1473A, Руководство пользователя

Результаты поиска

Содержание J1473A

Отзывы:

Похожие инструкции для J1473A

Бренды по названию

Популярные бренды