Using Wi-Fi
User’s Guide
8–4
4. Set up your
Dialing Rules
and
Exceptions
and press
OK.
The next step is to setup your network interface cards.
5. From the
iPAQ Wireless
screen, tap >
Settings.
6. Select
Add New ...
in the list box on the
General
tab to start
configuring wireless networks.
Note:
If a network was detected in step 3, the SSID is
automatically entered and cannot be changed.
7. Enter a SSID into the
Network Name
box.
8. In the
Connects to:
box, select where your network connects
to
(The Internet
or
Work).
9. If you want to connect to an ad-hoc connection, tap the
This
is a device-to-device (ad-hoc) connection
checkbox.
10. If authentication information is needed, from the
Configure
Wireless Network
screen, tap the
Network Key
tab.
Note:
To determine whether authentication information is
needed, see your network administrator.
11. To configure the type of network authentication to use, select:
a.
To use Shared Key authentication, tap the
Authentication (Shared mode)
listbox. Type the
network key in the
Network Key:
box.
b.
To use data encryption, tap the
Data encryption
(WEP enabled)
listbox.
c.
If a network key is provided by your network
automatically, tap the
The Key is provided for
me automatically
checkbox.
