manualshive.com logo in svg

HP HP ProCurve Series 6600, Руководство по обеспечению безопасности доступа

"HP HP ProCurve серии 6600 - это надежный коммутатор с улучшенной безопасностью доступа. Для использования функций безопасности необходимо скачать руководство по настройке Access Security Manual бесплатно с manualshive.com. Это руководство поможет вам максимально эффективно использовать все возможности коммутатора."

Поделиться
Скачать
background image

Hewlett-Packard Company
8000 Foothills Boulevard, m/s 5551
Roseville, California  95747-5551

www.hp.com/networking/support

© Copyright 2005–2011 Hewlett-Packard Development Company,
L.P. The information contained herein is subject to change with-
out notice. All Rights Reserved.

This document contains proprietary information, which is 
protected by copyright. No part of this document may be 
photocopied, reproduced, or translated into another lan- 
gauge without the prior written consent of Hewlett-Packard.

Publication Number

5998-2703
September 2011

Applicable Products

HP Switch E3500-24

(J9470A)

HP Switch E3500-48 

(J9472A)

HP Switch E3500-24-PoE

(J9471A)

HP Switch E3500-48-PoE 

(J9473A)

HP Switch E3500yl-24G-PWR

       (J8692A)

HP Switch E3500yl-48G-PWR

       (J8693A)

HP Switch E5406zl 

       (J8697A)

HP Switch E5406zl-48G-PoE+

(J9447A)

HP Switch E5412zl

       (J8698A)

HP Switch E5412zl-96G-PoE+

(J9448A)

HP Switch E6200yl-24G

       (J8992A)

HP Switch E8206zl

(J9475A)

HP Switch E8212zl

       (J8715A/B)

HP Switch E6600-24G

(J9263A)

HP Switch E6600-24G-4XG

(J9264A)

HP Switch E6600-24G-24XG

(J9265A)

HP Switch E6600-48G

(J9451A)

HP Switch E6600-48G-4XG

(J9452A)

Trademark Credits

Microsoft, Windows, and Microsoft Windows NT are U.S. 
registered trademarks of Microsoft Corporation.

Software Credits and Notices

SSH on HP switches is based on the OpenSSH soft- ware 
toolkit. This product includes software developed by the 
OpenSSH Project for use in the OpenSSH Toolkit. For more 
information on OpenSSH, visit www.openssh.com. 

SSL on HP switches is based on the OpenSSL software 
toolkit. This product includes software developed by the 
OpenSSL Project for use in the OpenSSL Toolkit. For more 
information on OpenSSL, visit 
www.openssl.org. 

This product includes cryptographic software written by 
Eric Young ([email protected]). This product includes 
software written by Tim Hudson ([email protected]).

Portions of the software on HP switches are based on the 
lightweight TCP/IP (lwIP) software toolkit by Adam 
Dunkels, and are covered by the following notices.

Copyright 

©

 2001-2003 Swedish Institute of Computer 

Science. All rights reserved. Redistribution and use in source 
and binary forms, with or without modification, are 
permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above 

copyright notice, this list of conditions and the following 
disclaimer.

2. Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions and the following 
disclaimer in the documentation and/or other materials 
provided with the distribution.

3. The name of the author may not be used to endorse or 

promote products derived from this software without 
specific prior written permission. 

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLU- 
DING, BUT NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, IN-
DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-
SEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIM- 
ITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSI-
NESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, 
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSI-
BILITY OF SUCH DAMAGE. 

This product includes software written by Adam Dunkels 
([email protected]).

Disclaimer

The information contained in this document is subject to 
change without notice.

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY 
OF ANY KIND WITH REGARD TO THIS MATERIAL, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not 
be liable for errors contained herein or for incidental or 
consequential damages in connection with the furnishing, 
performance, or use of this material.

The only warranties for HP products and services are set 
forth in the express warranty statements accompanying 
such products and services. Nothing herein should be 
construed as constituting an additional warranty. HP shall 
not be liable for technical or editorial errors or omissions 
contained herein.

Hewlett-Packard assumes no responsibility for the use or 
reliability of its software on equipment that is not furnished 
by Hewlett-Packard.

Содержание HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HP ProCurve Series 6600

2N OfficeRoute Quick Manual preview
OfficeRoute
Бренд: 2N Страницы: 11
2N stargate How To Set preview
stargate
Бренд: 2N Страницы: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Бренд: 2N Telekomunikace Страницы: 24
Zonet ZFS3008 Installation Manual preview
ZFS3008
Бренд: Zonet Страницы: 8
Falcon 4G COMBO User Manual preview
4G COMBO
Бренд: Falcon Страницы: 24
dixell XT120C Installing And Operating Insructions preview
XT120C
Бренд: dixell Страницы: 4
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Бренд: BSD Networks Страницы: 7
Variscite VAR-EXT-CB105 Datasheet preview
VAR-EXT-CB105
Бренд: Variscite Страницы: 18
UfiSpace S9700-23D Hardware Installation Manual preview
S9700-23D
Бренд: UfiSpace Страницы: 32
Perle IOLAN MDC User Manual preview
IOLAN MDC
Бренд: Perle Страницы: 491
Digisol DG-SR2004 User Manual preview
DG-SR2004
Бренд: Digisol Страницы: 73
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Бренд: NetComm Страницы: 34
Vivotek TB5328 SERIES User Manual preview
TB5328 SERIES
Бренд: Vivotek Страницы: 317
Westermo Viper-012 User Manual preview
Viper-012
Бренд: Westermo Страницы: 22
H3C SecPath L5030 Installation Manual preview
SecPath L5030
Бренд: H3C Страницы: 62
SMC Networks Barricade SMC7908VoWBRA2 Specifications preview
Barricade SMC7908VoWBRA2
Бренд: SMC Networks Страницы: 2
AIC HA201-AP User Manual preview
HA201-AP
Бренд: AIC Страницы: 64
RadioLabs O2Wind Instruction preview
O2Wind
Бренд: RadioLabs Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды