manualshive.com logo in svg

HP HP ProCurve Series 6600, Руководство по обеспечению безопасности доступа

"HP HP ProCurve серии 6600 - это надежный коммутатор с улучшенной безопасностью доступа. Для использования функций безопасности необходимо скачать руководство по настройке Access Security Manual бесплатно с manualshive.com. Это руководство поможет вам максимально эффективно использовать все возможности коммутатора."

Поделиться
Скачать
background image

7-25

Configuring RADIUS Server Support for Switch Services

Configuring and Using Dynamic (RADIUS-Assigned) Access Control Lists

However, if you do not want both the IPv4 and IPv6 traffic of the selected type to go to their 
respective “any” destinations, then two ACEs with explicit destination addresses are needed. In 
this case, do one of the following:
• Use 0.0.0.0/0 in one ACE to specify the “any” destination for IPv4 traffic, and use a specific 

IPv6 address for the destination in the other ACE.

• Use ::/0 in one ACE to specify the “any” destination for IPv6 traffic, and use a specific IPv4 

address for the destination in the other ACE.

For example, if you want to allow the IPv4 Telnet traffic from a client to go to any destination, but 
you want the IPv6 Telnet traffic from the same client to go only to a specific address or group of 
addresses, you will need to distinguish the separate destinations. This is done by using explicit 
addresses for the “any” destinations. For example:

HP-Nas-Rules-IPv6=1
Nas-filter-Rule=”deny in tcp from any to 0.0.0.0/0 23”
Nas-filter-Rule=”deny in tcp from any to fe80::b1 23”

The above example sends IPv4 Telnet traffic to its “any” destination, but allows IPv6 Telnet traffic 
only to fe80::b1 23.To reverse this example, you would configure ACEs such as the following:

HP-Nas-Rules-IPv6=1
Nas-filter-Rule=”deny in tcp from any to 10.10.10.1 23”
Nas-filter-Rule=”deny in tcp from any to ::/0 23”

In cases where you do not want the selected traffic type for either IPv4 or IPv6 to go to the “any” 
destination, you must use two ACEs to specify the destination addresses. For example:

HP-Nas-Rules-IPv6=1
Nas-filter-Rule=”deny in tcp from any to 10.10.10.1 23”
Nas-filter-Rule=”deny in tcp from any to fe80::23 23”

To use the IPv6 VSA while allowing only IPv4 traffic to be filtered, you would use a configuration 
such as the following:

HP-Nas-Rules-IPv6=2
Nas-filter-Rule=”permit in tcp from any to any”

IPv4-Only ACLs 
Applied to Client 
Traffic Inbound to the 
Switch

Assigns a RADIUS-
configured IPv4 ACL 
to filter inbound IPv4 
packets received from 
a specific client 
authenticated on a 
switch port.

HP-Nas-Filter-Rule (Vendor-Specific Attribute): 61

This attribute is maintained for legacy purposes (for configurations predating software release 
K.14.01) to support ACEs in RADIUS-assigned ACLs capable of filtering only IPv4 traffic. However, 
for new or updated configurations (and any configurations supporting IPv6 traffic filtering) HP 
recommends using the Standard Attribute (92) described earlier in this table instead of the HP-
Nas-filter-Rule attribute described here.

HP vendor-specific ID: 11
VSA: 61 (string = HP-Nas-Filter-Rule 

Setting:

 HP-Nas-filter-Rule = “< 

permit or deny ACE

 >”   

Note: 

An ACL applying this VSA to inbound traffic from an authenticated client drops any IPv6 

traffic from the client.

Service

Control Method and Operating Notes:

Содержание HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для HP ProCurve Series 6600

D-Link DSL-500 Command Reference Manual preview
DSL-500
Бренд: D-Link Страницы: 15
D-Link DSN-4100 Series Quick Start Manual preview
DSN-4100 Series
Бренд: D-Link Страницы: 2
D-Link DWL-G550 Product Data Sheet preview
DWL-G550
Бренд: D-Link Страницы: 2
Panasonic WJ-NV200K Quick Reference Manual preview
WJ-NV200K
Бренд: Panasonic Страницы: 4
Draytek VigorIPPBX 2820 Series Quick Start Manual preview
VigorIPPBX 2820 Series
Бренд: Draytek Страницы: 29
TP-Link TD-8817 User Manual preview
TD-8817
Бренд: TP-Link Страницы: 73
RuggedCom RUGGEDSWITCH RS900G Hardware Installation Manual preview
RUGGEDSWITCH RS900G
Бренд: RuggedCom Страницы: 23
Lancom 7100 VPN Manual preview
7100 VPN
Бренд: Lancom Страницы: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Бренд: Patton electronics Страницы: 12
Moxa Technologies PT-7710 Series Hardware Installation Manual preview
PT-7710 Series
Бренд: Moxa Technologies Страницы: 2
WAGO 750-459 Manual preview
750-459
Бренд: WAGO Страницы: 48
Moxa Technologies TAP-125 Series User Manual preview
TAP-125 Series
Бренд: Moxa Technologies Страницы: 51
Techroutes TSR 2800-30 Hardware Installation Manual preview
TSR 2800-30
Бренд: Techroutes Страницы: 20
3Com 3C8567 - SuperStack II NETBuilder SI 567... Datasheet preview
3C8567 - SuperStack II NETBuilder SI 567...
Бренд: 3Com Страницы: 6
M-system M5XSBS Instruction Manual preview
M5XSBS
Бренд: M-system Страницы: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Бренд: Kramer Страницы: 56
Kasda KE318EU User Manual preview
KE318EU
Бренд: Kasda Страницы: 39
TP-Link JetStream T2600G-28TS User Manual preview
JetStream T2600G-28TS
Бренд: TP-Link Страницы: 1136

Бренды по названию

Популярные бренды

Загрузить еще бренды