Managing remote servers through the Video Session Viewer 64
The cursor mode status of the Video Viewer window appears in the title bar, including the keystroke that
exits Single Cursor mode. Define the keystroke that exits Single Cursor mode in the Session Options
dialog box.
When using a device that captures keystrokes before they reach the client device, avoid using those keys
to restore the mouse pointer.
To enter Single Cursor mode, select
Tools>Single Cursor Mode
from the Video Viewer window menu,
or click the
Single Cursor Mode
button.
The local cursor does not appear and all movements are relative to the target device.
To select a key for exiting Single Cursor mode:
1.
Select
Tools>Session Options
from the Video Viewer window menu.
The Session Options dialog box appears.
2.
Click the
Mouse
tab.
3.
Select a terminating keystroke from the menu in the Single Cursor mode area.
4.
Click
Save
to save the settings.
When enabling Single Cursor mode, press the specified key to return to Regular Desktop mode.
To exit Single Cursor mode, press the key on the keyboard identified in the title bar.
To change the mouse cursor setting:
1.
Select
Tools>Session Options
from the Video Viewer window menu.
The Session Options dialog box appears.
2.
Click the
Mouse
tab.
3.
Select a mouse cursor type in the Local Cursor panel.
4.
Click
OK
to save the settings.
Mouse scaling
Some earlier versions of Linux did not support adjustable mouse acceleration. For installations that must
support these earlier versions, choose among three preconfigured mouse scaling options or set a custom
scaling. The preconfigured settings are Default (1:1), High (2:1), or Low (1:2).
In a 1:1 scaling ratio, every mouse movement in the desktop window sends an equivalent mouse
movement to the target device.
In a 2:1 scaling ratio, the same mouse movement sends a 2x mouse movement.
In a 1:2 scaling ratio, the value is 1/2x.
To set mouse scaling:
1.
Select
Tools>Session Options
from the Video Viewer window menu.
The Session Options dialog box appears.
2.
Click the
Mouse
tab.
3.
To use a preconfigured setting, select the appropriate radio button.
4.
To set a custom scaling:
a.
Select the
Custom
radio button to enable the X and Y fields.
b.
Enter a scaling value in the X and Y fields. For every mouse input, the mouse movements are
multiplied by the respective X and Y scaling factor. The valid input range is 0.25 to 3.00.
Содержание G3 KVM
Страница 6: ...Contents 6 ...
Страница 73: ...Warranty and regulatory information 73 ...
