26
Installing a MIM
IMPORTANT:
•
To install a MIM, install it to the HMIM adapter and then insert it into the HMIM slot.
•
You can install a MIM when the router is powered on. However, before replacing a MIM when the
router is powered on, you must execute the
remove hmimslot slotnumber
command.
•
A MIM interface module can be 1U or 0.5U. This section takes a 0.5U interface module for
example. When you install a 1U interface module to an MSR router, remove the filler panels of
the target slot and the neighboring slot above, and use the 1U HMIM adapter.
•
If you install MIMs on both of the HMIM slots on an MSR3024, when you insert a MIM to the
upper slot, slightly press down the MIM, and then push it into the slot.
To install a MIM:
1.
Remove the fastening screws with a Phillips screwdriver to remove the filler panel.
2.
Push the MIM slowly along the slide rails until it makes close contact with the backplane of the
HMIM adapter.
3.
Fasten the fastening screws.
4.
Fasten the captive screws on the MIM to secure it to the HMIM adapter.
Figure 31 Attaching a MIM to an HMIM adapter
5.
Push the MIM into the slot along the slide rails until it makes close contact with the backplane of
the router.
6.
Fasten the captive screws to secure the MIM to the router.
Figure 32 Installing the MIM to the router
Содержание FlexNetwork MSR3012
Страница 5: ...iii Index 80 ...
Страница 25: ...20 Figure 22 Grounding the router through the grounding terminal on the rack ...
Страница 48: ...43 Figure 57 MSR3024 internal module locations 1 Front panel 2 Rear panel 3 VPM 4 Memory module ...
Страница 49: ...44 Figure 58 MSR3044 internal module locations 1 Front panel 2 Rear panel 3 VPMs 4 Memory module ...
