HP FlexFabric 11908-V, Руководство по установке

Страница: 71 / 114

65
Appendix B FRUs and compatibility matrixes
This appendix describes the FRUs available for the switch and their compatibility.
All the FRUs listed in this appendix are hot swappable.
MPUs
MPU is the supervisor engine and core of the control management plane for the switch. The switch
supports the MPU LSU1SUPB9.
MPUs are ordered separately. The switch requires one MPU to operate correctly. You can also install two
MPUs for redundancy.
Table 19 describes the MPU specifications, and Table 20 shows the MPU product code and model
matrix.
Table 19 MPU specifications
Item LSU1SUPB9 supervisor engine
Interfaces
•
One console port for local or remote dialup configuration management
•
One 10/100/1000BASE-T interface for management and upgrade
Interface transmission
rate
•
Console port —No greater than 115200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface —10/100/1000 Mbps
Cables and max
transmission distance
•
Console port —15 m (49.21 ft) over common asynchronous serial interface cable
•
10/100/1000BASE-T interface —100 m (328.08 ft) over Category-5 twisted
pairs
Table 20 MPU product code and model matrix
MPU model Product code HP description
LSU1SUPB9 JG609A HP FlexFabric 11900 Main Processing Unit
LPUs
Table 22 lists LPUs' product codes and descriptions. For more information about the transceiver modules
that each LPU supports, see " Transceiver modules ."
Table 21 LPU specifications
LPU model Connector Number of
interfaces
Interface
transmission rate
Available transceiver
modules
LSU1TGS32SF9 LC 32 1/10 Gbps
•
10-Gigabit SFP+ module
•
10-Gigabit SFP+ cable
•
Gigabit SFP module