HP f890g, Руководство пользователя

Страница: 30 / 57

29
3.4.3 Parking Mode
To monitor the vehicle when it is parked, you can activate Vibration
Detection, or Motion and Collision Detection .
Follow the steps below to change the settings for Parking Mode:
1.
Press the button to enter the OSD menu.
2. Press the / button to
select Parking Mode , and then
press the
OK
button for
entering function menu.
3.
Press the / button to configure Parking Mode (Vibration
Detection / Motion and Collision Detection / Off), and then press the
OK
button to complete setting.
•
Vibration Detection:
-
If disconnected external power supply when the camcorder
is powered on, the system alert message “
Wait 10 seconds
to enter Vibration Detection. ” This means the system will
power off and enter Vibration Detection automatically in 10
seconds.
-
Once Vibration Detection Mode is triggered, when the
camcorder detects any collision, it will automatically power
on and start recording, the event will be recorded for 60
seconds (per file).
-
In this mode, car camcorder is powered off until event
happens. This mode is more power saving.
•
Motion and Collision Detection:
-
If disconnected external power supply when the camcorder
is powered on, the system alert message “
Enter
parking