manualshive.com logo in svg

HP EliteOne 705 G1, Руководство по обслуживанию и ремонту, Страница: 161 / 194

Поделиться
Скачать
HP EliteOne 705 G1 Скачать руководство пользователя страница 161

Creating recovery media using HP Recovery Manager (select models only)

●

To create recovery discs, your computer must have a DVD writer. Use DVD+R or DVD-R discs (purchased

separately). The discs you use will depend on the type of optical drive you are using.

NOTE:

DVD+R DL, DVD-R DL, or DVD±RW disc are not supported.

●

You have the option of creating a recovery USB flash drive instead, using a high-quality USB drive.

●

If you are creating recovery discs, be sure to use high-quality discs. It is normal for the system to reject

defective discs. You will be prompted to insert a new blank disc to try again.

●

The number of discs in the recovery-disc set depends on your computer model (typically 3 to 6 DVDs).

The Recovery Media Creation program tells you the specific number of blank discs needed to make the

set. If you are using a USB flash drive, the program will tell you the size of the drive required to store all

the data (minimum of 8 GB).

NOTE:

The process of creating recovery media is lengthy. You can quit the process at any time. The

next time you initiate the process, it resumes where it left off.

NOTE:

Do not use media cards for creating recovery media. The system may not be able to boot up from a

media card and you may not be able to run system recovery.

To create recovery discs:

1.

Close all open programs.

2.

Click the 

Start

 button, click 

All Programs

, click 

Security and Protection

, click 

Recovery Manager

, and

then click 

HP Recovery Media Creation

. If prompted, click 

Yes

 to allow the program to continue.

3.

Click 

Create recovery media using blank DVD(s)

, and then click 

Next

.

4.

Follow the on-screen instructions. Label each disc after you make it (for example, Recovery 1, Recovery

2), and then store the discs in a secure place.

To create a recovery USB flash drive:

NOTE:

You must use a USB flash drive with a capacity of at least 8 GB.

1.

Close all open programs.

2.

Insert the USB flash drive into a USB port on the computer.

3.

Click the 

Start

 button, click 

All Programs

, click 

Security and Protection

, click 

Recovery Manager

, and

then click 

Recovery Media Creation

.

4.

Click 

Create recovery media with a USB flash drive

, and then click 

Next

.

5.

Select the USB flash drive from the list of media. The program will let you know how much storage is

required to create the recovery drive. If the USB flash drive does not have enough storage capacity, it

will appear grayed out, and you must replace it with a larger USB flash drive. Click 

Next

.

NOTE:

Recovery Media Creation formats the USB flash drive, deleting any files on it.

6.

Follow the on-screen instructions. When the process is complete, label the USB flash drive and store it

in a secure place.

ENWW

Backing up, restoring, and recovering in Windows 7 151

Содержание EliteOne 705 G1



































































































































































































Отзывы:

Нет отзывов