HP EliteOne 705 G1 Скачать руководство пользователя страница 107

Страница: 107 / 194

Table 6-2

Computer Setup—Storage (continued)

Boot Order

Allows you to:

●

UEFI Boot Sources:

Specify the order in which UEFI boot sources (such as a internal hard drive, USB

hard drive, USB optical drive, or internal optical drive) are checked for a bootable operating system

image. Each device on the list may be individually excluded from or included for consideration as a

bootable operating system source.

UEFI boot sources always have precedence over legacy boot sources.

●

Legacy Boot Sources:

Specify the order in which legacy boot sources (such as a network interface

card, internal hard drive, USB optical drive, or internal optical drive) are checked for a bootable

operating system image. Each device on the list may be individually excluded from or included for

consideration as a bootable operating system source.

Specify the order of attached hard drives. The first hard drive in the order will have priority in the

boot sequence and will be recognized as drive C (if any devices are attached).

NOTE:

To drag a device to a preferred place, press

Enter

. To remove the device from consideration as a

bootable device, press

You can use

to disable individual boot items, as well as disable UEFI boot and/or legacy boot.

NOTE:

MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has

started.

Shortcut to Temporarily Override Boot Order

To boot

one time

from a device other than the default device specified in Boot Order, restart the

computer and press

Esc

(to access the boot menu) and then

(Boot Order), or only

(skipping the boot

menu) when the monitor light turns green. After POST is completed, a list of bootable devices is

displayed. Use the arrow keys to select the preferred bootable device and press

Enter

. The computer then

boots from the selected non-default device for this one time.

ENWW

Computer Setup (F10) Utilities

Содержание EliteOne 705 G1



































































































































































































Результаты поиска

Содержание EliteOne 705 G1

Отзывы:

HP EliteOne 705 G1, Руководство по обслуживанию и ремонту, Страница: 107 / 194

Результаты поиска

Содержание EliteOne 705 G1

Отзывы: