manualshive.com logo in svg

HP EliteDesk 705 G5, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteDesk 705 G5 Скачать руководство пользователя страница 92

Blurry video or requested resolution cannot be set.

Cause

Solution

If the graphics controller was upgraded, the correct graphics 
drivers may not be loaded.

Install the video drivers included in the upgrade kit.

Monitor is not capable of displaying requested resolution.

Change requested resolution.

Graphics card is bad.

Replace the graphics card.

The picture is broken up, rolls, jitters, or flashes.

Cause

Solution

The monitor connections might be incomplete or the monitor 
might be incorrectly adjusted.

1.

Be sure the monitor cable is securely connected to the 
computer.

2.

In a two-monitor system or if another monitor is in close 
proximity, be sure the monitors are not interfering with each 
other’s electromagnetic field by moving them apart.

3.

Fluorescent lights or fans might be too close to the monitor.

Monitor needs to be degaussed.

Degauss the monitor. See the documentation that came with the 
monitor for instructions.

Image is not centered.

Cause

Solution

Position may need adjustment.

Press the monitor's Menu button to access the OSD menu. Select 
ImageControl/ Horizontal Position or Vertical Position to adjust 
the horizontal or vertical position of the image.

“No Connection, Check Signal Cable” displays on screen.

Cause

Solution

Monitor video cable is disconnected.

Connect the video cable between the monitor and computer.

IMPORTANT:

Make sure that the computer power is off while 

connecting the video cable.

“Out of Range” displays on screen.

Cause

Solution

Video resolution and refresh rate are set higher than what the 
monitor supports.

Restart the computer and enter Safe Mode. Change the settings to 
a supported setting then restart the computer so that the new 
settings take effect.

To enter Safe Mode in Windows 10:

1.

Log in to the computer using an Administrator account.

84

Chapter 6   Troubleshooting without diagnostics

Содержание EliteDesk 705 G5










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды