Replacing a drive in the upgrade bay
The upgrade bay can hold either a hard drive or an optical drive.
Replacing a hard drive
CAUTION:
To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the upgrade bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
To remove a hard drive from the upgrade bay:
1.
Save your work.
2.
Shut down the computer and close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the upgrade bay toward you.
6.
Remove the battery (see
Inserting or removing the battery on page 26
).
7.
Remove the service door (see
Removing or replacing the service door on page 27
).
8.
Loosen the upgrade bay screw
(1)
.
9.
Using a flat-bladed screwdriver, gently push the tab to release the hard drive
(2)
.
10.
Remove the hard drive from the upgrade bay
(3)
.
To install a hard drive in the upgrade bay:
1.
Turn the computer upside down on a flat surface, with the upgrade bay toward you.
Replacing a drive in the upgrade bay
33
Содержание EliteBook 8570w
Страница 1: ...Getting Started HP Notebook ...
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...