Smart card reader
Description
Spare part number
Smart card reader (includes cable)
651363-001
Smart card reader bracket
598767-001
Before removing the card reader board and bracket, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
), and then remove the following components:
a.
Service access cover (see
Service access cover on page 42
.)
b.
Keyboard (see
Keyboard on page 62
.)
c.
Base enclosure (see
Base enclosure on page 66
.)
d.
Top cover (see
Top cover on page 71
.)
Remove the smart card reader board and bracket:
1.
Open the ZIF connector
(1)
for the smart card cable, and remove the cable
(2).
2.
Disconnect the cables
(3)
and
(4)
from the TouchPad.
3.
Remove the Philips M2.0x3.0 screw
(5)
that secures the smart card reader board to the top
cover, and then remove the smart card reader board
(6)
.
Reverse this procedure to install the smart card reader board, cable, and bracket.
76
Chapter 4 Removal and replacement procedures
Содержание EliteBook 2560p
