HP Elite x2 1011 G1, Руководство по техническому обслуживанию и ремонту

Страница: 86 / 155

3. Remove the keyboard base battery (3).
Reverse this procedure to install the keyboard base battery.
Power connector cable
Description Spare part number
Power connector cable 793714-001
Before removing the power connector cable, follow these steps:
1. Shut down the keyboard base. If you are unsure whether the keyboard base is off or in Hibernation, turn
the keyboard base on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the keyboard base.
3. Disconnect the power from the keyboard base by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the keyboard base.
4. Remove the bottom cover (see Bottom cover on page 74 ).
5. Disconnect the keyboard base battery cable from the keyboard base system board (see Keyboard base
battery on page 75 ).
Remove the power connector cable:
76 Chapter 6 Removal and replacement procedures – Keyboard base