HP Edgeline EL4000, Руководство по техническому обслуживанию и ремонту

Страница: 42 / 66

1
2
1
8. Using a Torx screwdriver, remove the six T-15 screws, and then remove PXIe riser board from the
PXIe riser assembly.
1
1
2
1
1
Removing and replacing the baseboard
The following procedures are for both the passthru and switch baseboards.
Perform one of the following procedures depending on the configuration of your system:
• Remove and replace the baseboard in a PCI configuration on page 42
• Remove and replace the baseboard in a PXIe configuration on page 43
Remove and replace the baseboard in a PCI configuration
Procedure
1. Power down the system( Power down the system on page 23).
2. Dismount the system ( Dismount the system on page 23).
3. Remove all cartridges ( Removing and replacing the cartridge on page 32).
4. Remove the access panel ( Removing the PCIe access panel on page 23).
5. Remove the fixed top cover ( Removing the fixed top cover of the PCIe system on page 25).
6. Remove the left PCIe riser assembly ( Removing the left PCIe riser assembly on page 26).
7. Remove the right PCIe riser assembly ( Removing the right PCIe riser assembly on page 27).
8. Do one of the following:
42 Removing and replacing the baseboard