HP Edgeline EL4000 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 66

HP Edgeline EL4000 Скачать руководство пользователя страница 2

©

2017 Hewlett Packard Enterprise Development LP

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett
Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty.
Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,
use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer
Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard
Enterprise has no control over and is not responsible for information outside the Hewlett Packard
Enterprise website.

Acknowledgments

Intel

®

, Itanium

®

, Pentium

®

, Intel Inside

®

, and the Intel Inside logo are trademarks of Intel Corporation in

the United States and other countries.

Microsoft

®

and Windows

®

are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Linux

™

is the registered trademark of Linus Torvalds in the U.S. and other countries.

SD

™

and microSD

™

are trademarks or registered trademarks of SD-3C in the United States, other

countries or both.

NVIDIA

™

is a trademark of NVIDIA Corporation in the U.S. and other countries.

«
1
2
3
4
...
»

Содержание Edgeline EL4000



































































Отзывы:

Нет отзывов