HP E2470A, Руководство пользователя

Страница: 11 / 71

Setting Up the Preprocessor Interface
Hardware
Setting up the preprocessor interface hardware consists of the
following major steps:
•
Turn off the logic analyzer and the target system.
C A U T I O N
To protect your equipment, remove the power from both the logic analyzer
and the target system before you make or break connections. Because the
logic analyzer supplies power to the preprocessor interface, the logic
analyzer should always be powered up before the target system; when
powering down, power down the target system first and then power down
the logic analyzer.
•
Set the slide switches on the top of the preprocessor interface
according to the configuration of the MC68HC16Y1.
•
Attach the HP E5335A probe to the target system.
•
Attach the preprocessor interface to the HP E5335A probe.
•
Connect the logic analyzer pods to the cable connectors of the
preprocessor interface board.
•
Load the appropriate configuration file.
The remainder of this section describes these general steps in more
detail.
Setting Up the Preprocessor Interface Hardware
1–4