HP E-MSM310, Руководство по управлению и настройке

Страница: 100 / 210

Working with VSCs
VSC configuration options
4-16
Incoming wireless traffic filters
Applies to traffic sent from wireless users to the AP.
Accepted
 Any IP traffic addressed to the controller.

PPPoE traffic (The PPPoe server must be the upstream device.)
 IP broadcast packets, except NetBIOS

Certain address management protocols (ARP, DHCP) regardless of their source address.
 Any traffic addressed to the AP, including 802.1X.
Blocked
 All traffic that is not accepted is blocked. This includes NetBIOS traffic regardless of its
source/destination address. HTTPS traffic not addressed to the AP (or upstream device)
is also blocked, which means wireless users cannot access the management tool on other
HP APs.
Outgoing wireless traffic filters
Applies to traffic sent from the AP to wireless users.
Accepted
 Any IP traffic coming from the upstream device, except NetBIOS packets.
 PPPoE traffic from the upstream device.
 IP broadcast packets, except NetBIOS
 ARP and DHCP Offer and ACK packets.
 Any traffic coming from the AP itself, including 802.1X.
Blocked
 All other traffic is blocked. This includes NetBIOS traffic regardless of its source/
destination address.
Wireless protection
Three types of wireless protection are offered: WPA, 802.1X, and WEP.
On the MSM410 and MSM422
When using 802.11n, wireless protection settings are enforced as follows:
 WEP protection is never permitted. If selected, WPA or WPA2 protection is used instead.

When using pure 802.11n in either the 2.4 or 5 GHz bands, WPA2 protection is used
instead of WPA.