HP DL360 - ProLiant - Photon, Справочное и ремонтное руководство

Страница: 108 / 246

108 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
Loose Connections
Action:
•
Be sure all power cords are securely connected.
•
Be sure all cables are properly aligned and securely connected for all external
and internal components.
•
Remove and check all data and power cables for damage. Be sure no cables
have bent pins or damaged connectors.
•
If a fixed cable tray is available for the server, be sure the cords and cables
connected to the server are correctly routed through the tray.
•
Be sure each device is properly seated.
•
If a device has latches, be sure they are completely closed and locked.
•
Check any interlock or interconnect LEDs that may indicate a component is
not connected properly.
•
If problems continue to occur, remove and reinstall each device, checking the
connectors and sockets for bent pins or other damage.
Problems with New Hardware
Action:
1. Refer to the server documentation to be sure the hardware being installed is a
supported option on the server. Remove unsupported hardware.
2. Refer to the release notes included with the hardware to be sure the problem
is not caused by a last minute change to the hardware release. If no
documentation is available, refer to the HP support website
(
http://www.hp.com/support ).
3. Be sure the new hardware is installed properly. Refer to the device, server,
and operating system documentation to be sure all requirements are met.
Common problems include:
−
Incomplete population of a memory bank
−
Installation of a processor without a corresponding PPM