manualshive.com logo in svg

HP DesignJet T730, Руководство по устранению неисправностей

Поделиться
Скачать
HP DesignJet T730 Скачать руководство пользователя страница 45

C

Restoring the Flash Image

System Requirements

To create a recovery device for the purpose of reflashing or restoring the software image on the ROM, you will 
need the following:

●

A personal computer running Windows 7, Windows 8.1, or Windows 10.

●

One or more HP t730 Thin Clients

●

8-GB USB flash device for Microsoft Windows Embedded Standard 7 (WES 7) (if using the USB format) or 
Linux.

This restore method will not work with all USB flash devices. USB flash devices with multiple 
partitions generally do not support this restore method. The range of USB flash devices available on the 
market is constantly changing. Not all USB flash devices have been tested with the HP Thin Client 
Imaging Tool.

Before using the utility, you must download the appropriate image from 

http://www.hp.com

.

Getting Started

There are two deployment options supported by this utility. You can choose to do one or more of the 
following using your personal computer:"

●

Create a bootable flash image on a USB flash device.

●

Unbundle the image to a directory for use in a custom deployment scenario or PXE image.

Download and run the Package-for-the-Web deliverable (an .exe file) that contains the original factory image 
for the thin client. The HP Thin Client Imaging Tool (CRStart.exe) runs automatically.

Choose one of the deployment options: Each option is described in the following paragraphs.

●

USB Format

●

Deployment

During the restore process, the thin client flash drive will be reformatted and all data on it will be erased 
before the system image is copied to it. To prevent loss of data, be sure that you have saved any user-
created data from the flash drive. During the first restart of the thin client following the restore process, 
it may take approximately 15 minutes to unbundle the software before the Windows Desktop is 
displayed.

System Requirements

39

Содержание DesignJet T730


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды