2-4
Compaq Setup and Diagnostic Software
Writer: kmosby Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-002
File Name: C-CH02.DOC Last Saved On: 12/11/98 4:13 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Computer Setup Features
Continued
Task
Computer Setup Selection
Enable and disable power LED blink in
suspend mode.
NOTE:
This selection does not appear if the
energy saver mode is disabled.
Select
Power, then select Energy Saver
Options.
Enable the Power-on Password. For more
information, see the section “Security
Management” in Chapter 3.
Select
Security, then select Power-On
Password.
Enable and disable network server mode. For
more information, see the section “Security
Management” in Chapter 3.
NOTE:
This selection appears only if a Power-
on Password is set.
Select
Security, then select Password
Options.
Enable the Setup (administrator) Password.
For more information, see the section
“Security Management” in Chapter 3.
Select
Security, then select Setup
Password.
Enable/disable serial, parallel, and USB ports
and audio security
Select
Security, then select Device
Security.
Set the Asset Tag and Ownership Tag. See
the section “Security Management” in
Chapter 3 for more information.
Select
Security, then select System IDs.
Set the keyboard locale setting (for example,
English or German) for the System ID entry
Select
Security, then select System IDs.
Enable/disable Network Service Boot
Select
Security, then select Network
Service Boot.
Enable/disable the SCSI controller order for
Compaq SCSI options. Enables the embedded
SCSI controller to boot before or after any
plug in adapters.
Select
Storage, then select SCSI
Controller Order.
Continued
