4.
Scroll down and highlight and select
Sleep Timer > Set Current Time
.
NOTE:
You must set the current local time before you reset the time for
Sleep Time
or
On
Time
. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is
displayed as 13 hours 15 minutes.
A power failure or loss of power to the monitor will cause the timer to reset to 00:00. If this
occurs, you will need to reset the sleep timer mode.
5.
Press the
Menu
button once to enter the adjustment mode for hours.
6.
Press the
–
(Minus) or
+
(Plus) button to adjust the hour.
7.
Press the
Menu
button again to enter the time for minutes.
8.
Press the
–
(Minus) or
+
(Plus) button to adjust the minutes.
9.
Press the
Menu
button to lock in the time chosen.
10.
After setting the current time, the highlight automatically skips to
Set Sleep Time
. Repeat steps
6 through 9 to set
Sleep Time
.
11.
If you do not want to set
Sleep Time
, press the
Menu
button twice, then select
Save and
Return
to exit the menu.
12.
After setting
Sleep Time
, the highlight automatically skips to
Set On Time
. Repeat steps 6
through 9 to set
On Time
.
13.
Set the
Timer mode
to
On
to activate the
Sleep Timer
settings.
14.
When you are finished, select
Save and Return
to exit the menu.
The fifth selection,
Sleep Now
, turns the monitor backlights off immediately and stays in sleep mode
until the next
On Time
activates or a monitor button is pressed.
ENWW
Sleep Timer Mode
19
Содержание Compaq L1506x
Страница 1: ...HP Compaq L1506x LCD Monitor User Guide ...
Страница 4: ...iv About This Guide ENWW ...
