WARNING!
To reduce risk of personal injury from hot surfaces, allow the internal system
components to cool before touching.
5.
Open both latches of the memory module socket
(1)
, and insert the memory module into the
socket
(2)
.
Figure 8-30
Installing a DIMM
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
A DIMM must occupy the XMM1 socket. Always populate the white sockets before the black
sockets in each channel.
In order to create a dual-channel memory configuration, the memory capacity of Channel A must
equal the memory capacity of Channel B. Refer to
Populating DIMM Socketson page 105
for more
information.
6.
Push the DIMM module down firmly into the socket, ensuring that the module is fully inserted and
properly seated. The DIMM must be pushed all the way down into the socket and sit evenly in the
socket to avoid memory corruption. Make sure the latches are in the closed position
(3)
.
7.
Repeat steps 5 and 6 to install any additional modules.
Memory 107
Содержание Compaq dx2810 Microtower
Страница 4: ...iv About This Book ...
Страница 10: ...x ...
Страница 37: ...Figure 6 2 Model dx2810 Special Edition Figure 6 3 Model dx2818 Chassis Designations 27 ...
