HP Cluster Platform Express v2010 Скачать руководство пользователя страница 125

Страница: 125 / 140

F HCA PCI Card Specifications

Appendix F

includes specifications for the following HCA PCI cards and mezzanine HCAs:

•

Voltaire HCA–400 PCI Card Specifications (

Section F.1

•

Topspin/Mellanox PCI-X HCA Specifications (

Section F.2

•

Topspin/Mellanox PCI-Express HCA Specifications (

Section F.3

•

Mellanox PCI-X HCA Specifications (

Section F.4

•

Mellanox PCI-Express HCA Specifications (

Section F.5

•

Mellanox Memory Free PCI-Express HCA (SDR) Specifications (

Section F.6

•

Mellanox Memory Free PCI-Express HCA (DDR) Specifications (

Section F.7

•

Mellanox PCI-Express DDR HCA Specifications (

Section F.8

•

4x DDR IB Mezzanine HCA Specifications (

Section F.9

F.1 Voltaire HCA–400 PCI Card Specifications

The Voltaire HCA-400 is a dual-port, 4X (10 Gb/s) InfiniBand host channel adapter that supports
the following formats:
•

PCI-Express bus interface that provides over 2500 MB/sec throughput

•

PCI/PCI-X bus interface provides over 800 MB/sec throughput

It provides multi-protocol support for MPI, SDP, IPoIB, DAPL and iSER (iSCSI RDMA), enabling
a variety of high performance applications.
The technical specifications of the HCA-400 are as follows:

Specification

Feature

Dual port 4X (10 Gb/s) InfiniBand PCI-Express low profile host channel adapter,
PCI-Express 1.0 (4X or 8X).

HCA-400Ex format and bus
interface

Dual port 4X (10 Gb/s) InfiniBand PCI/PCI-X low profile host channel adapter, PCI-X
1.0 (3.3V, 64-bit 133 MHz); PCI 2.2 (32/64-bit, 33/66 MHz).

HCA-400 format and bus
interface

InfiniBand v1.1 compatible design.

InfiniBand Specifications

MTU Size: 2,048 Bytes, max.

Multicast Support, up to 2048 groups.

Virtual Lanes: 8 Data and 1 Management.

Physical Partitions: up to 64 per port.

Maximum message size: 1 GByte Standard InfiniBand Agents (SMA, PMA, CM).

Two auto-sensing 1X/4X InfiniBand ports, 8-pair MicroGigaCN copper.

InfiniBand Interface

128 MB, optional 256 MB.

Memory

MPI Support: MPI-CH (open source), MPI-Pro, Scali-MPI, and HP-MPI (available
separately).

Protocol Software

uDAPL and kDAPL.

IP and TCP: IETF IPoIB, and IBTA Socket Direct (SDP).

Storage: IETF iSCSI/iSER (iSCSI RDMA), Lustre, PVFS2, and NFS/RDMA (through
kDAPL).

Network Booting (PXE).

Loop-back tests, host stack diagnostics and automated deployment utilities.

Diagnostic Software

SNMP MIB: draft-IETF-IPoIB-IBIF-MIB, Telnet/SSH for configuration and automation.

Management Interfaces

MTBF: 400,000 hours.

Reliability

F.1 Voltaire HCA–400 PCI Card Specifications

125

Содержание Cluster Platform Express v2010













































































































































Результаты поиска

Содержание Cluster Platform Express v2010

Отзывы:

Похожие инструкции для Cluster Platform Express v2010

Бренды по названию

Популярные бренды

HP Cluster Platform Express v2010, Руководство пользователя

Результаты поиска

Содержание Cluster Platform Express v2010

Отзывы:

Похожие инструкции для Cluster Platform Express v2010

Бренды по названию

Популярные бренды