HP Cluster Platform Express v2010 Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 140

background image

Specification

Feature

You can install up to three of the following InfiniBand form factor router blades in each
router blade drawer:
• Voltaire IPR (IP Router):

— IPR InfiniBand Form Factor for integration with ISR 9096, providing high-speed

layer 4-7 switching and TCP Termination

— 4 interfaces: IEEE 802.3ab, and 802ad (link aggregation) compliant.
— Connectors: 4 ports, 1000BASE-SX mini-GBIC RJ-45 or optic (SMF); RJ-45 for

management.

— Indicators: 2 InfiniBand link/activity LEDs, 4 GbE link/activity LEDs, system LED

and management link LEDs.

— Blade reset button.

• Voltaire FCR (FC Router):

— FCR InfiniBand form factor for integration with ISR 9096, providing shared storage

connectivity to servers, with support for high-availability, Multi-Pathing, security
and storage volume management capabilities.

— 4 interfaces, Up to 400MBps per channel full duplex, 1 or 2-Gb auto-sensing FC
— Connectors: 4 Fibre Channel ports, external small form factor LC pluggable; RJ-45

for Management

— Indicators: 2 InfiniBand link/activity LEDs, 4 Fibre Channel link/activity LEDs,

system LED and management link LEDs

— Blade reset button

Router Blade Drawer

• Connectors: EIA/TIA-232 Console DB-9 and 10/100Ethernet RJ45
• Indicators:

— Subnet manager activity (2 LEDs)
— Chassis management activity (2 LEDs)
— Fabric boards (4 LEDs)
— Temperature LED.

• Management/device reset button

Control (rear)

• Consumption is 1000W maximum (full configuration).
• Operating voltage 85-265V AC, 50/60 Hz auto-sensing.
• One to four power supply Modules with N:1 or N:N redundancy.
• Indicators

— Operational AC and DC Status LEDs

Power Requirements

• Front-to-back airflow by active fan.
• Heat dissipation is 3400 BTU/Hour maximum for a full configuration.

Cooling Air Flow

• Optional front or rear rack mounting.
• 19 inches rack width requirement.
• 6U rack space height requirement.
• Chassis dimensions:

— Width 17.5" (444 mm).
— Depth 22.75" (578 mm).
— Height 11" (280 mm)

Dimensions

77 to 110 lb (35 to 50 kg), depending on configuration.

Weight

• Ambient Operating Temperature 32° to 113°F (0° to 45°C).
• Operating Humidity 15 to 80%, non-condensing.
• Operating Altitude 0 to 9843 ft (3000m).
• Storage Temperature -13° to 158°F (-25° to +70°C).
• Storage Humidity 5 to 90% non-condensing.
• Storage Altitude 0 to 15,000 ft (4570m).

Environmental

118

ISR 9096 Interconnect Specifications

«
...
116
117
118
119
120
...
»

Содержание Cluster Platform Express v2010













































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cluster Platform Express v2010

Бренд: FastVDO Страницы: 16

Бренд: bioscrypt Страницы: 72

Бренд: Dormakaba Страницы: 27

Бренд: Toshiba Страницы: 20

Бренд: Shopify Страницы: 6

Бренд: Radeon Страницы: 49

Бренд: OKN Страницы: 3

Бренд: Peritek Страницы: 183

Бренд: Advantech Страницы: 28

Бренд: Diablotek Страницы: 1

Бренд: Shintaro Страницы: 11

Бренд: IDTECK Страницы: 26

Бренд: LS Страницы: 19

The Wildcat 4110 PRO

Бренд: 3Dlabs Страницы: 40

Бренд: Solid State Logic Страницы: 28

Oxygen GVX1 Pro

Бренд: 3Dlabs Страницы: 34

Бренд: Videx Страницы: 2

Бренд: EVGA Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды