manualshive.com logo in svg

HP Cisco MDS 8/12c, Руководство по выпуску, Страница: 13 / 44

Поделиться
Скачать
HP Cisco MDS 8/12c Скачать руководство пользователя страница 13

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

13

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(1)

OL-25090-01

  Upgrading Your Cisco MDS NX-OS Software Image

Selecting the Correct Software Image for an MDS 9200 Series Switch

The system and kickstart image that you use for an MDS 9200 series switch depends on which switch 
you use, as shown in 

Table 8

.

Selecting the Correct Software Image for an MDS 9500 Series Switch

The system and kickstart image that you use for an MDS 9500 Series are for switches with a 
Supervisor-2 module, as shown in 

Table 9

. Cisco NX-OS Release 5.x and Release 4.x do not support the 

Supervisor-1 module. 

Use the 

show module

 command to display the type of supervisor module in the switch. The following 

is sample output from the 

show module

 command on a Supervisor 2 module:

switch# 

show module

Mod  Ports  Module-Type                      Model              Status

---  -----  -------------------------------- ------------------ ------------

...

...

7    0      Supervisor/Fabric-2              DS-X9530-SF2-K9    active *

8    0      Supervisor/Fabric-2              DS-X9530-SF2-K9    ha-standby

Upgrading Your Cisco MDS NX-OS Software Image

This section lists the guidelines recommended for upgrading your Cisco MDS NX-OS software image 
and includes the following topics:

•

Upgrading Guidelines Specific to NX-OS Release 5.2(1), page 14

•

General Upgrading Guidelines, page 15

•

FICON Supported Releases and Upgrade Paths, page 17

Note

Before you begin the upgrade process, review the list of chassis and modules that Cisco MDS NX-OS 
Release 5.2(1) supports. See the 

“MDS 9000 Chassis and Module Support” section on page 7

.

For detailed instructions for performing a software upgrade using Cisco DCNM, see the 

Cisco DCNM 

Release Notes, Release 5.2

, which is available from the following website:

http://www.cisco.com/en/US/partner/products/ps10495/prod_release_notes_list.html

Table 8

Software Images for MDS 9200 Series Switches

Cisco MDS 9200 Series Switch Type

Naming Convention

MDS 9222i

Filename begins with m9200-s2ek9 

Table 9

Software Images for Supervisor Type

Cisco MDS 9500 Series Switch 
Type

Supervisor Module Type

Naming Convention

MDS 9513, 9509, and 9506

Supervisor-2 module
Supervisor-2A module

Filename begins with m9500-sf2ek9 

Содержание Cisco MDS 8/12c













































Отзывы:

Нет отзывов