HP CC487-91209 Скачать руководство пользователя страница 87

Страница: 87 / 168

Follow the steps in the Fax Setup Wizard to configure the required settings.

When the Fax Setup Wizard finishes, the option to hide the

Initial Setup

button appears on the

Home screen.

Access the Fax Setup Wizard

after initial setup through the control panel by following these steps:

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Fax Send Setup

●

Fax Setup Wizard

Follow these steps to configure the required fax settings using the Fax Setup Wizard:

Touch your country/region on the first screen of the Fax Setup Wizard and then touch the

button.

Touch the date and time boxes to enter the date/time, and then touch the

button.

Touch the

Company Name

and

Fax Number

boxes to enter your company name and fax

number, and then touch the

button.

Touch the

Dialing Prefix

box to enter your dialing prefix, if required, and then touch the

button.

Confirm your fax configuration settings on the final screen of the Fax Setup Wizard. Touch the

Finish

button to complete the Fax Setup Wizard.

-or-

Touch the

Back

button to move back through the Fax Setup Wizard screens and make changes

to your configuration entries.

NOTE:

The settings configured using the Fax Setup Wizard on the control panel override any

settings made in the embedded Web server.

NOTE:

If the

Fax Setup

menu settings does not appear in the menu listing, LAN or internet fax

might be enabled. When LAN or internet fax is enabled, the analog fax accessory is disabled and the

fax menu does not display. Only one fax feature, either LAN fax, analog fax or internet fax, can be

enabled at a time. The fax icon displays for either fax feature. If you wish to use analog fax when LAN

fax is enabled, use the HP MFP Digital Sending Software Configuration Utility or the product

embedded Web server to disable LAN fax.

Set or verify the date and time

The date and time setting for the fax accessory is the same value as the product date and time

setting. This information can be entered using the Fax Setup Wizard, or by following these steps:

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

ENWW

Required fax settings 75

Содержание CC487-91209









































































































































































Результаты поиска

Содержание CC487-91209

Отзывы:

HP CC487-91209, Руководство по факсу, Страница: 87 / 168

Результаты поиска

Содержание CC487-91209

Отзывы: