HP CC487-91209 Скачать руководство пользователя страница 48

Страница: 48 / 168

●

Original size (such as letter or A4)

●

Original sides - 1–sided or 2–sided printing

●

Optimize text/picture (text, mixed text and graphics, or graphics and photos) Sending

graphics and photos in text mode results in lower quality images.

●

Content Orientation (portrait or landscape)

●

Job Build combines multiple scans into a single job.

●

Image adjustment

Sharpness enhances text and graphic edges.

Darkness

Background removes a background that might be a result from copying color paper.

●

Notification changes how you are notified of the status of the fax transmission (that is, if the

fax was sent or if an error occurred and the fax was not sent). You can print the

notifications or send them to an e-mail address.

NOTE:

Notification changes the notification setting for the current fax only.

When all settings are completed on the Settings screen, touch

to return to the Fax screen.

Using the keyboard, enter a phone number. Touch the green down-arrow to add the number to

the recipients list.

To remove a number from the list, touch the number and then touch

Delete

NOTE:

If needed, enter a comma (,) to provide a two second pause after a prefix number (such

as a "9" or "0") to allow the internal phone system time to access an outside line before the

remainder of the number is dialed. To enter a comma, press the

Pause

button on the control

panel.

To enter a PIN as part of the recipient number, use the keypad on the control panel. Touch the

Fax Recipients

field, and then touch the

button. This inserts a left bracket ([). Type the PIN,

and then touch the

button again to insert the right (]) bracket. The number within the

brackets is not displayed in the fax number that appears on fax reports.

Touch

Start

to send the fax. You can either touch the

Start

icon on the touch screen or press the

green

Start

button on the control panel.

If the fax recipient number matches one or more saved speed dials, the matched speed dials are

displayed and you are asked if you want to continue sending the fax to the indicated recipient(s).

Touch

Yes

to confirm the number and send the fax, or touch

to cancel the fax. Note that this

step is not required if the Fax Number Speed Dial Matching feature is disabled.

If the fax recipient number does not match any saved speed dials, a number confirmation screen

appears and you must re-type the fax number. After re-typing the number, touch

to send the

fax. Note that this step is not required if the Fax Number Confirmation feature is disabled.

NOTE:

If you have made any changes to the settings on the Settings screen (such as changing

notification or 1-sided to 2-sided), a Processing Job screen displays asking "Would you like to keep

your current settings?". If you press

Yes

, the product returns you to the Fax screen and the settings

you made are retained. This allows you to send another fax using the same settings. If you press

the settings are cleared (returned to their default values) and the product home screen displays.

36 Chapter 2 HP Color LaserJet CM3530 MFP Series

ENWW

Содержание CC487-91209









































































































































































Результаты поиска

Содержание CC487-91209

Отзывы:

HP CC487-91209, Руководство по факсу, Страница: 48 / 168

Результаты поиска

Содержание CC487-91209

Отзывы: