8 Chapter 1: Introduction
Step 3 Locate the left paper guide and slide it through the left slot of
the paper tray. See Figure 8.
The paper guides are labeled T,L for top left and T,R for top right. The
shorter arm should be on top and the flange should point inward.
Step 4 Locate the paper size markers on the HCO and find the
alignment hole that corresponds to the desired paper size.
See Figure 7.
Note
Paper size markers appear on both the top and bottom of the HCO.
Figure 7 Paper size markers
Note
When you first install the HCO, Hewlett-Packard recommends you set
the paper guides as far apart as possible (A3/A4 setting). You don’t
need to adjust the guides unless the HCO has paper stacking
problems.
LGL
B5
EXEC
B4
LTR
11/17
A4
A3
LGL
B5
EXEC
B4
LTR
11/17
A4
A3
Paper size
markers
Alignment
holes
