Chapter 2: Using the HCO 25
Adjusting the paper guides
Note
Hewlett-Packard recommends you set the paper guides as far apart
as possible (A3/A4 setting). You don’t need to adjust the guides unless
the HCO has paper stacking problems.
To adjust the paper guides:
Step 1 Locate the paper guides on the HCO.
There are two paper guides, one on each side of the HCO.
Step 2 Release a guide by unscrewing the knurled screws that
connect the guide to the top and bottom of the HCO.
Figure 25 Releasing a paper guide
Step 3 Use the paper size markers at the top and bottom of the HCO
to reposition the guide to the desired paper size.
Figure 26 Paper size markers
,,
,,,,
,,,,
,,
,,
,,,,
,,,,
,,,
,,
LGL
B5
EXEC
B4
LTR
11/17
A4
A3
LGL
B5
EXEC
B4
LTR
11/17
A4
A3
,,
,,,,
,,,,
,,,
,
,,
,,,,
,,,,
,,,
,
Top of HCO
Bottom of HCO
,,,
,,,,
,,,,,
,,,,
,,