To Set Up the Interface Pod
6
To Set Up the Interface Pod
Caution
Handle the interface pod with care to avoid electrostatic discharge (ESD)
damage during unpacking, installation, and operation. The connectors on
the front and rear of the interface pod are susceptible to ESD.
1
Insert the interface pod into the analyzer.
See “To Insert the Interface Pod” on page 7. The procedure is the same for
all interface pods.
2
Connect the interface pod to the system under test.
See “To Connect to the System Under Test” on page 8. The analyzer
automatically recognizes and configures the interface pod.
3
If you want to change any of the configuration parameters, see “To
Manually Configure the Interface Pod” on page 11.
