HP BL460c - ProLiant - G5, Руководство по техническому обслуживанию и ремонту

Страница: 27 / 64

Removal and replacement procedures 27
To replace the component:
1.
Install the hard drive backplane. Press down on the connector to seat the board.
2.
Install the access panel (" Access panel " on page 23 ).
3.
Install the server blade.
Front panel/hard drive cage assembly
To remove the component:
1.
Power down the server blade (on page 22 ).
2.
Remove the server blade (on page 22 ).
3.
Remove the access panel (" Access panel " on page 23 ).
4.
Remove all hard drives (" Hard drive " on page 24 ).
5.
Remove all hard drive blanks (" Hard drive blank " on page 23 ).
6.
Remove the hard drive backplane (" Hard drive backplane " on page 26 ).