HP BL460c - ProLiant - G5 Скачать руководство пользователя страница 2

Страница: 2 / 64

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP

shall not be liable for technical or editorial errors or omissions contained herein.

Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Linux is a U.S. registered trademark of Linus Torvalds.

June 2006 (First Edition)

Part Number 405778-001

Audience assumptions

This guide is for an experienced service technician. HP assumes you are qualified in the servicing of

computer equipment and trained in recognizing hazards in products with hazardous energy levels and

are familiar with weight and stability precautions for rack installations.

Содержание BL460c - ProLiant - G5

































































Результаты поиска

Содержание BL460c - ProLiant - G5

Отзывы:

Похожие инструкции для BL460c - ProLiant - G5

Бренды по названию

Популярные бренды

HP BL460c - ProLiant - G5, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание BL460c - ProLiant - G5

Отзывы:

Похожие инструкции для BL460c - ProLiant - G5

Бренды по названию

Популярные бренды