HP Aruba 8325 Series, Руководство по установке и началу работы

Страница: 27 / 70

Chapter 2 Introducing the Aruba 8325 Switch 27
Fan assembly status LED
Use the
show environment fan
command for fan status information. (See the Aruba 8325 Fundamentals
Guide for ArubaOS-CX 10.02 or later at https://asp.arubanetworks.com/downloads .)
Switch features
The features of the Aruba 8325 switch include:
• Combinations of fixed QSFP28 and SFP28 ports, as described under Network ports .
• For secure environment, all ports are disabled by default.
• The option to have one or two power supplies: A second power supply supports redundant system power. If
one of the power supplies fails, the second power supply immediately provides the power necessary to keep
the switch running.
• The QSFP28 and SFP28 ports always operate at full duplex.
• Easy management of the switch through several available interfaces:
◦ Command line interface —A full featured, easy to use, VT-100 terminal interface for out-of-band switch
management.
◦ Web browser interface --An easy to use built-in graphical interface that can be accessed from common
web browsers.
• Support for the Spanning Tree Protocol to eliminate network loops.
• Support for up to 4094 IEEE 802.1Q-compliant VLANs so you can divide the attached end nodes into logical
groupings that fit your business needs.
• Support for many advanced features to enhance network performance.
• To download product updates, go to either of the following:
◦ Hewlett Packard Enterprise Support Center Get connected with updates page:
www.hpe.com/support/e-updates
◦ Aruba Support Portal: asp.arubanetworks.com/downloads
◦ To view and update your entitlements, and to link your contracts and warranties with your profile, go to the
Service Management tab on the Aruba Support Portal at asp.arubanetworks.com .
Table 22: Fan assembly LED behavior
Fan assembly LED Function State Meaning
Status LED To display fan assembly
status. On green The fan assembly is operating
normally.
On red The fan assembly has been
disabled by the system due to
system airflow direction conflict
or has failed.