HP AdvanceStack J2610B, Инструкция по установке и справочник

Страница: 44 / 67

This appendix lists cables that have been tested and verified for use with the
HP AdvanceStack Hub-8U. It also includes minimum pin-out information so,
if you wish to use an unlisted cable, you can verify that the cables used in
your installation are correctly wired. Note that each pin-out does not
necessarily match the pin-out for the corresponding HP cable, but cables
manufactured to follow the minimum pin-out will function correctly.
Incorrectly wired cabling is the most common cause of problems for LAN
communications. HP recommends that you work with a qualified LAN cable
installer for assistance with your cabling requirements.
Recommended Cables
Cable Function Cable Type HP Product Number
Network connections to the hub:
Hub to end node
connection or hub to hub
connection using the
MDI/MDI-X switch Twisted-pair “straight-
through” cable 92268A (4 pair, 4 meters)
92268B (4 pair, 8 meters)
92268C (4 pair, 16 meters)
92268D (4 pair, 32 meters)
92268N (4 pair, 300 meters)
You can contact your HP-authorized dealer or call HP at 1-800-538-8787 to
order these parts.
Cables and
Co
nnectors
Cables and Connectors
A-2