HP AD560-96002 Скачать руководство пользователя страница 110

Страница: 110 / 136

110 Regulatory compliance notices

Declaration of Conformity for products marked with the FCC

logo, United States only.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

For questions regarding this FCC declaration, contact us by mail or telephone:

•

Hewlett-Packard Company

P.O. Box 692000, Mail Stop 510101

Houston, Texas 77269-2000

•

Or call 1-281-514-3333

Modification

The FCC requires the user to be notified that any changes or modifications made to this device that are not

expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment.

Cables

When provided, connections to this device must be made with shielded cables with metallic RFI/EMI

connector hoods in order to maintain compliance with FCC Rules and Regulations.

Canadian notice (Avis Canadien)

Class A equipment

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numérique de la class A respecte toutes les exigences du Règlement sur le matériel brouilleur

du Canada.

Class B equipment

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numérique de la class B respecte toutes les exigences du Règlement sur le matériel brouilleur

du Canada.

Содержание AD560-96002









































































































































Результаты поиска

Содержание AD560-96002

Отзывы:

HP AD560-96002, Руководство пользователя, Страница: 110 / 136

Результаты поиска

Содержание AD560-96002

Отзывы: