manualshive.com logo in svg

HP 83751A, Руководство пользователя

Поделиться
Скачать
HP 83751A Скачать руководство пользователя страница 254

Specifications and Options

Options

Option 

   Source

Module Connector and

Extension Cable

If Option 

 is ordered, source module interfacing hardware is added.

This includes a connector on the rear panel and an extension cable that
allows the mm-wave module to be positioned in front of the sweeper. This
option provides direct frequency and power level control of HP 83550 series

millimeter-wave source modules from the front panel of the sweeper. 

 and HP 

 sweepers require external amplification to drive

source modules. High power sweeper models HP 

 and HP 

 can

directly drive source modules.

 

There are three mechanical options available for the sweeper. If these options

were not ordered with the original shipment, and are now desired, they can

be ordered from the nearest Hewlett-Packard office using the part numbers

included in each of the following descriptions.

Option 

 Rack Mount 

Ordering Option 

 adds a rack mount kit without handles. The HP part

Kit without Handles

number for the rack mount kit without handles is 5062-3977.

Option 

   Rack Mount

Ordering Option 

 adds a rack mount kit with handles. The HP part

Kit with Handles

number for the rack mount kit with handles is 5062-3983.

Option 

   Portable

Handle and Front-panel
Cover

Ordering Option 

 adds tilt-bail handle, rubber bumpers, rear feet and a

protective front panel cover for Eeld test applications where portability is
desired. Complies with 

 Class 5 Style D. The HP part number

for the portability kit is 5063-0092.

17-20

Содержание 83751A



























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды