HP 83751A, Руководство пользователя

Страница: 217 / 282

I I
Error Messages
Error Messages
An <error/event number> in the range -399, -300 or [ 1, 32767
indicates that the instrument has detected an error which is not a command
error, a query error, or an execution error; some device operations did not
properly complete, possibly due to an abnormal hardware or
condition. These codes are also used for self- test response errors. The
occurrence of any error in this class should cause the
error bit
(bit 3) in the event status register (IEEE 488.2, section 11.5.1) to be set. The
meaning of positive error codes is device-dependent and may be enumerated
or bit mapped; the <error message> string for positive error codes
is not defined by SCPI and available to the device designer. Note that the
string is not optional; if the designer does not wish to implement a string
for a particular error, the string should be sent (for example, 42,”
The occurrence of any error in this class should cause the device-specific
error bit (bit 3) in the event status register (IEEE 488.2, section
to be
set. Events that generate device-specihc errors shall not generate command
errors, execution errors, or query errors; see the other error
in this
section.
16-19