manualshive.com logo in svg

HP 8360, Руководство пользователя

Поделиться
Скачать
HP 8360 Скачать руководство пользователя страница 5

General Safety
Considerations

WARNING

l 

No operator serviceable parts inside. Refer servicing to qualified

personnel. To prevent electrical shock, do not remove covers.

n 

For continued protection against fire hazard replace line fuse only

with same type and rating (F 

 The use of other fuses or

material is prohibited.

n 

This is a Safety Class I product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.

n 

This is a Safety Class I product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.

n 

If this instrument is used in a manner not specified by

Hewlett-Packard Co., the protection provided by the instrument may
be impaired. This product must be used in a normal condition (in
which all means for protection are intact) only.

V

Содержание 8360





























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды