HP 8360, Руководство пользователя

Страница: 40 / 508

Power Level and
Sweep Time
Operation
Power Level Operation
The synthesizer can produce leveled power for CW, swept frequency,
or power sweep operation. The selected power level can range from
-20
(-110 for option 001 synthesizers) to
For practice: Press
(
POWER LEVEL
)
I-] The active entry
area shows:
POWER LEVEL: -20.00
If the selected power level is beyond the range of the synthesizer, the
closest possible power is shown in both the data display area and the
active entry area. If the selected power level exceeds the maximum
leveled power the synthesizer is able to produce, the unleveled
message UNLVLED appears on the message line. Experiment with the
rotary knob and the arrow keys as alternate methods of data entry.
Sweep Time Operation In typical applications the sweep time can vary tremendously, from
milliseconds in a network analyzer system, to more than a minute in
thermistor-based power meter systems. For this example, refer to the
“MENU MAP” section.
Press
Press
Press
Watch the green SWEEP LED, it blinks every 2.5 seconds. The LED
blinks at each retrace.
For the fastest sweep speed for which all specifications are
guaranteed, the synthesizer must be in automatic sweep time
selection.
Refer to menu map 8.
Press SWEEP
Select more .
Select Aut
0 .
Notice that the active entry area indicates:
SWEEP TIME:
100.0 AUTO
When the synthesizer is in automatic sweep time selection, the
active entry area displays AUTO along with the current sweep time.
Faster sweep speeds than this are possible, turn the rotary knob
counter-clockwise until the display no longer changes. Notice that
AUTO is no longer displayed
Getting Started Basic