
NOTE:
When using VC Flex-10 Modules with Flex-10 NICs on server blades, only VC Ethernet modules may
be used for Ethernet connections in the same enclosure.
HP BladeSystem c3000 Enclosure
NOTE:
The following tables show a number of typical, supported configurations for an HP BladeSystem c3000 Enclosure.
[Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] Empty
[Bay 4] Empty
[Bay 1] VC-Enet
[Bay 2] Empty
[Bay 3] Empty
[Bay 4] Empty
[Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-FC
[Bay 4] VC-FC
NOTE:
When using VC Flex-10 Modules with Flex-10 NICs on server blades, only VC Ethernet modules may
be used for Ethernet connections in the same enclosure.
Required Cabling
NOTE:
For available cables; please see the "Options" section below of this QuickSpecs.
Maximum Distances Multimode OM1
62.5/125 micron
Multimode OM2
50/125 micron
Multimode OM3
50/125 micron
Singlemode
9 micron
SR
2 - 26m/33m*
2 - 82m
2 - 300m
LR
2 -10km
LRM
0.5 - 220m
0.5 - 220m
0.5 - 220m
* 26m at 160MHz and 33m at 200MHz.
NOTE:
For additional information on 10Gb cable specifications go to:
http://www.hewlett-packard.com/rnd/pdfs/10gig_cabling_technical_brief.pdf
QuickSpecs
HP Virtual Connect Flex-10/10D Module for c-Class
BladeSystem
Supported Products
DA - 14408 Worldwide — Version 8 — September 10, 2013
Page 9