DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name:
Hewlett-Packard Company
Manufacturer's Address:
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name:
LaserJet 5100 Series
Model Number:
Q1860A, Q1861A, Q1862A
Including accessories: Q2424A, Q1866A, Q1864A
Product Options:
ALL
conforms to the following Product Specifications:
Safety:
IEC 60950:1991+A1 + A2 + A3 + A4 / EN 60950: +A1 + A2 + A3 + A4 + A11
IEC 60825-1:1993 + A1 / EN 60825-1 + A11 Class 1 Laser/LED Product
EMC:
CISPR 22:1993 + A1 + A2 / EN 55022:1994 + A1 + A2 Class B*
EN 61000-3-2:1995 / A14
EN 61000-3-3:1995
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B
2
/ ICES-003, Issue 3
AS / NZS 3548:1995 + A1 + A2
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive
73/23/EEC, and carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
*)
The product includes LAN (Local Area Network) options. When the interface cable is attached to LAN connectors,
the product meets the requirements of EN55022 Class A in which case the following applies: Warning – This is a
class A product. In a domestic environment this product may cause radio interference in which case the user may
be required to take adequate measures.
3) The model number may include an additional suffix letter “R”.
Boise, Idaho USA
20 December, 2001
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia.
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE / Standards Europe, Herrenberger
Straße 130, D-71034 B™blingen (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015
(Phone: 208-396-6000)
