Local port operation 44
Assigning names to servers
1.
From the Names dialog box ("
Assigning server and serial device names
" on page
43
), select the
name or port number and click
Modify.
The Name Modify dialog box appears.
2.
Enter a name in the New Name field. Names can be one to 15 characters in length. Permitted
characters are case-sensitive and can consist of A–Z, 0–9, spaces, and hyphens.
3.
Click
OK
to transfer the new name to the names list in the Names dialog box.
4.
Repeat steps 1 through 3 for each server in the system.
5.
Click
OK
to save settings, click
X
to exit, or press the
Esc
key to exit without saving settings.
NOTE:
Changes made in the Name Modify dialog box are not saved until you click
OK
in the
Names dialog box.
Setting up a scan pattern
In Scan mode ("
Activating Scan mode
" on page
46
), the console switch automatically scans port to port
(server to server).
