background image

English 25

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide

Regulatory Information

FCC (for USA only)

Federal Communications Commission Radio Frequency Interference Statement

 

Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates and uses, and 
can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to correct the interference by one or more of 
the following measures:

• reorient or relocate the receiving antenna

• increase the separation between the equipment and the receiver

• connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected

• consult the dealer or an experienced radio/TV technician for help.

Hewlett-Packard’s FCC Compliance Tests were conducted with HP-supported peripheral devices 
and HP shielded cables, such as those you receive with your system. Changes or modifications 
not expressly approved by Hewlett-Packard could void the user’s authority to operate the 
equipment.

Notice for Canada

This Class B digital apparatus with the Canadian ICES-003 Regulations. 
Cet appareil numérique est conforme à la norme NMB-003 du Canada.

Notice for Japan

3Com.book  Page 25  Tuesday, August 31, 1999  11:36 AM

Содержание 3C905C-TX































Отзывы: