HP 316095-B21 - StorageWorks Edge Switch 2/24, Руководство по установке

Страница: 77 / 154

Installing and Configuring the Edge Switch 2/24
77 Edge Switch 2/24 Installation Guide
To configure SNMP trap recipients:
1. At the Hardware View page for the selected switch, choose Configure >
SNMP Agent. The Configure SNMP Agent dialog box displays ( Figure 22 ).
Figure 22: Configure SNMP Agent dialog box
a. For each trap recipient to be configured, enter a community name of 64 or
fewer alphanumeric characters in the associated Community Name field.
The community name is incorporated in SNMP trap messages to ensure
against unauthorized viewing or use.
b. Click the check box in the Write Authorization column to enable or
disable write authorization for the trap recipient (default is disabled). A
check mark in the box indicates write authorization is enabled. When the
feature is enabled, a management workstation user can change the HAFM
appliance’s
sysContact
,
sysName
, and
sysLocation
SNMP
variables.
c. Enter the IP address or DNS host name of the trap recipient (SNMP
management workstation) in the associated Trap Recipient field. Use 32
or fewer alphanumeric characters. It is recommended that the IP address
be used.
d. The default user datagram protocol (UDP) port number for trap recipients
is
162
. Enter a decimal port number in the associated UDP Port
Number field to override the default.
2. To enable transmission of trap messages to configured SNMP management
workstations, click Enable Authorization Traps. A check mark displays in
the box when transmission is enabled (
Figure 23 ).