HP 316095-B21 - StorageWorks Edge Switch 2/24, Руководство по установке, Страница: 125 / 154

Manage Firmware Versions
121 Edge Switch 2/24 Installation Guide
c. Choose Maintenance > Backup & Restore Configuration. The Backup
and Restore Configuration dialog box displays.
d. Click Backup. When the backup process finishes, the Backup Complete
dialog box displays.
e. Click OK to close the dialog box and return to the Hardware View page.
5. Choose Maintenance > Firmware Library. The Switch Firmware Library
dialog box displays, as shown in Figure 48 on page 114.
6. Choose the firmware version to be downloaded and click Send. The send
function verifies existence of certain Edge Switch conditions before the
download process begins. If an error occurs, a message displays indicating the
problem must be fixed before firmware is downloaded. Conditions that
terminate the process include:
■
A redundant CTP card failure.
■
The firmware version is being installed to the Edge Switch by another
user.
■
The Edge Switch-to-HAFM appliance link is down.
If a problem occurs and a corresponding message displays, refer to the HP
StorageWorks Director 2/24 Service Manual for specific information on
isolating the problem. If no error occurs, the Send Firmware confirmation box
displays, as shown in
Figure 53 .
Figure 53: Send Firmware Warning dialog box
7. Click Yes. The Send Firmware dialog box displays.
As the download begins, a “
Writing data to FLASH”
message
displays at the top of the dialog box, followed by a
Sending Files
message. This message remains as a progress bar travels across the dialog box
to show percent completion of the download. The bar progresses to 50% when
the last file is transmitted to the first CTP card. The bar remains at the 50%
point until the Edge Switch performs an Initial Program Load (IPL) (indicated
by an
IPLing
message).